| Centre Working Frequency(kHz): | 1MHz±2% | Overall Sensitivity: | -7dB Min |
| Beam Angle: | 6° | Operating Temperature: | 4～95℃ |
| The Material Of The Housing: | PPS | Minimal Parallel Impedance: | 150Ω±30% |
| High Light: | ultrasonic flow transducer , high frequency ultrasonic sensor |
High power 1MHz ultrasonic flow sensor for liquid flowrate measurement
The need for accurate and reliable sensors is growing in so many markets around the world, such as industrial and manufacturing, automotive, medical, energy, and smart grid applications. The designers and end-users of these sensors are counting on newer technologies that use less power and deliver higher accuracy -- technologies that will eliminate moving parts and allow sensing in remote locations and in less- than-ideal conditions. One of the most effective areas of sensor technology is ultrasonic, the science that measures the time interval between an ultrasonic signal that is sent and received, or what is commonly referred to as "time- of-flight" (TOF). TI is leveraging its ultrasonic expertise to deliver new signal conditioning solutions to fluid level sensing, fluid identification, flow metering, and distance sensing customers with its latest product based on time-to-digital converters .
Flowmeter suitable for most types and sizes of plastic tubing available on the market
Multiple off-the-shelf standard sizes for various tubing dimensions
Sensor solutions for tubing materials, such as PVC, silicone, PFA, PTFE, etc.
Signal processing
Complete electronic signal processing unit integrated into the sensor body
No external electronis board or display required
Configurable current, frequency or pulse output
Flow Sensor Applications
Chemical spray systems
Slurry lines
Dosing systems
Bioprocessing
Pump protection
Lab use
Parameters
| Model | TL1000KA |
| Centre working frequency (kHz) | 1.00MHZ±2% |
| Bandwidth (-6dB) | 25% |
| overall sensitivity 0 dB=3 Vp-p; cycle:5; distance:8cm (transmitter and receiver) | -7dB min |
| Distance measure range | 1.0m |
| Blind zone | 3cm |
| Beam angle(-3dBfull angle) | 6° |
| electrostatic capacity | 1200PF±20% |
| Minimal parallel impedance | 150Ω±30% |
| Maxim operating voltage (Pulse Duty cycle ratio 2%) | ＜200V |
| Operating temperature | 4～70℃ |
| The material of the housing | PPS |
| IP rate | IP68 |
Dimension
Testing curve
